SPECIFIER BRIEF · 01 / 01
Rev. 2026-05 · arxfit.com
Specifying ARX in a wellness build
Everything required for site planning, electrical scoping, install coordination and post-occupancy operation. One page. Designed to print.
Footprint
ARX Omni
78" × 50"
32 sqft
Footprint
ARX Alpha
60" × 42"
18 sqft
Power
Standard
120V / 20A
NEMA 5-20
Ceiling
Min. clear
84"
for safe arc
Floor, ceiling, electrical
- Floor load
- 50 lb/sqft static minimum. Concrete on-grade preferred. Wood-framed acceptable with verified joist spec.
- Floor finish
- Sealed concrete, rubber tile (¼" or thicker) or sport vinyl. ARX provides anti-slip mat under each unit.
- Ceiling
- 84" minimum clear at unit centerline. 90" or more preferred for tall users.
- HVAC
- Conditioned space, 65–75°F, RH 30–60%. No special exhaust required.
- Electrical
- Dedicated circuit recommended. Standard 120V / 20A NEMA 5-20 outlet within 6 feet of unit.
- Network
- Wi-Fi for session sync. Wired Ethernet drop optional.
- Access
- 36" door clear minimum. Crating arrives palletized; site must accept pallet jack.
From PO to first session
WEEK 0
Purchase order and site survey
ARX project manager assigned within 24 hours.
WEEKS 1–6
Manufacture
Built to order in Austin, TX. Status visible to specifier.
WEEK 7
Pre-install confirmation
Floor plan, electrical photo, ceiling clearance review.
WEEK 8
White-glove install
1-day on-site by ARX team. Includes calibration, network setup, operator orientation.
WEEK 8 + 1
First session
Operator-ready. ARX clinical partnerships available for staff training (Kyle Chance).
ARX OMNI
78" × 50"
ARX ALPHA
60" × 42"
FIG.01 · TYPICAL TWO-MACHINE LAYOUT · NTS
Two-machine room, 14 by 12 feet
Standard pairing: one ARX Omni for full upper and lower workflows, one ARX Alpha for split-stance and unilateral movements. Total room footprint roughly 168 sqft including circulation. Single-machine rooms accept either unit at 100 sqft minimum.
CAD blocks (.dwg, .rvt, .skp) available on request from Kyle Chance · kyle@arxfit.com.
Specifier desk
Kyle Chance
kyle@arxfit.com
Direct line for site planning, RFP responses, BIM blocks.
Install support
ARX Operations
ops@arxfit.com
Pre-arrival logistics, freight scheduling, install-day point-of-contact.
Post-occupancy
ARX Service
service@arxfit.com
Annual maintenance scheduling, software updates, replacement parts.
Next step for specifiers
Request the project package — CAD blocks, full submittals, MEP letter.